Day of scheduled work, crew arrives between 7-7:30 AM, BC hydro crew or subcontractor

will show up approx. around the same time to turn off the power.

-Power will be turned off for the whole day.

Approx.: 7am-5pm (Power will be disconnected, power will be reconnected later in the

afternoon once electrical inspector has passed the work)

The crew will arrive on site and lay out drop cloths, poly, and or use a vacuum to clean up

the drywall/dust afterwards.

Customer is responsible for removing any fragile valuables from the work area and creating

an open space for working. Furthermore, creating a clear path for attic access and have

clothing removed from closets.

The crew will determine a lay-out depending on work site lay-out and framing. The team will

try their best to meet customers’ needs and wants according to site lay-outs and framing.

The team will remove the old panel, install the new 200A panel. The layout of the 200A panel

will depend on framing. Labeling will be completed according to original labeling completed.

200A Meter base will be surface mounted onto the outside of the home, original one will be

abandoned. 2″ EMT mast pipe will be run on the surface of the home until it reaches the

desired height. (3) U-bolts will need to be installed to fasten the piping to the home. The pipe

needs to be structurally secured so 2×4 framing blocking will be required to be installed.

Drywall cutting will be required for this to be installed. 2″ hole maybe required to be cut in the

roof inorder for mast to poke out of the roof. Depending on the height of the mast pipe a guy

wire may need to be installed to provide support. A new ground plate will need to be installed,

buried 2ft deep. Concrete maybe removed and re-installed, additional cost for customer.